Asphalt Tonnage — Pothole / Patch Program
Mix tonnage and truckloads for a pothole / patch program from dimensions, lift and density.
Patch math multiplies small numbers by big counts: 30 patches at 0.43 t each is a 13-tonne day. The hidden tonnage is the milled box's irregular floor — actual depth averages 15–20% over nominal, which this calculator's waste factor should carry.
Formula
Note: Paving estimates only — the project mix design, agency specification and the plant's QC data govern. Temperature models are simplified; verify with an infrared gun and density gauge on the mat.
Mix tonnage and truckloads for a pothole / patch program from dimensions, lift and density. A free asphalt paving temperature & logistics tool — no sign-up, no upload, instant results in your browser.
About Asphalt Tonnage — Pothole / Patch Program
Asphalt Tonnage — Pothole / Patch Program computes the governing relationship t = L·W·h·ρ × (1 + waste) live as you type. Patch math multiplies small numbers by big counts: 30 patches at 0.43 t each is a 13-tonne day. The hidden tonnage is the milled box's irregular floor — actual depth averages 15–20% over nominal, which this calculator's waste factor should carry. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use Asphalt Tonnage — Pothole / Patch Program
- 1Enter your values — Length, Width, Compacted thickness, Compacted density and more (sensible defaults are pre-filled).
- 2Read the live results: Mix required, Truckloads, Area.
- 3Check the "with your numbers" line to see t = L·W·h·ρ × (1 + waste) substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use Asphalt Tonnage — Pothole / Patch Program?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula t = L·W·h·ρ × (1 + waste) with authoritative sources cited on the page (NAPA — HMA paving handbook & best practices)
- ✓Patch math multiplies small numbers by big counts: 30 patches at 0.43 t each is a 13-tonne day.
- ✓SI ⇄ Imperial toggle converts your inputs in place, so you can work in the units your drawings use
Frequently asked questions
What formula does the asphalt tonnage — pothole / patch program use?+
It evaluates t = L·W·h·ρ × (1 + waste), exactly as published. Sources: NAPA — HMA paving handbook & best practices. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
Patch math multiplies small numbers by big counts: 30 patches at 0.43 t each is a 13-tonne day. Paving estimates only — the project mix design, agency specification and the plant's QC data govern. Temperature models are simplified; verify with an infrared gun and density gauge on the mat.
When is this calculator the right tool for the job?+
Mix tonnage and truckloads for a pothole / patch program from dimensions, lift and density. A free asphalt paving temperature & logistics tool. The hidden tonnage is the milled box's irregular floor — actual depth averages 15–20% over nominal, which this calculator's waste factor should carry. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Does it support both metric and imperial units?+
Yes — the SI ⇄ Imperial toggle converts the values already in the fields, preserving the physical quantity, so you can flip mid-calculation without re-entering anything.
Related tools
- Asphalt Tonnage — Shared-Use Path
- Asphalt Tonnage — Mill & Overlay
- Asphalt Tonnage — Roundabout
- Asphalt Tonnage — Industrial Yard (Heavy Duty)
- Asphalt Tonnage — Sport Court
- Asphalt Tonnage — Rural Road Widening
- Paver Speed — Match Plant Output
- Erection Rate — Industrial Platforms/Pipe Racks
- MACRS 5-Year Depreciation — 14 ft Motor Grader
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live