Cast Iron Pipe Friction Loss Calculator
Darcy–Weisbach head loss for water in cast iron pipe (ε = 0.26 mm) with auto friction factor.
Roughness 0.26 mm: new cast iron; tuberculated old mains can reach ε of several mm.
Formula
Cast Iron Pipe Friction Loss Calculator is a free cast iron friction loss for pump engineers, plumbers and plant designers — instant, accurate and 100% client-side, with the governing formula and reference shown next to the result so the number can be defended, not just quoted.
About Cast Iron Pipe Friction Loss Calculator
Darcy–Weisbach head loss for water in cast iron pipe (ε = 0.26 mm) with auto friction factor. The calculation implements h_f = f·(L/D)·V²/2g with ε = 0.26 mm (cast iron), water 20 °C (Moody chart roughness values — Crane TP-410). Roughness 0.26 mm: new cast iron; tuberculated old mains can reach ε of several mm.
How to use Cast Iron Pipe Friction Loss Calculator
- 1Enter Flow rate in L/s.
- 2Enter Pipe inner diameter in mm.
- 3Enter Pipe length in m.
- 4Read Head loss, Loss per 100 m, Velocity instantly — no submit button needed.
- 5Need US units? Flip the SI/Imperial toggle and every field converts.
Why use Cast Iron Pipe Friction Loss Calculator?
- ✓Implements the standard formula — h_f = f·(L/D)·V²/2g with ε = 0.26 mm (cast iron), water 20 °C
- ✓Reference cited on-page: Moody chart roughness values — Crane TP-410
- ✓One-click SI ⇄ Imperial toggle — values convert in place, physics stays in SI
- ✓Runs entirely in your browser — nothing uploaded, free forever
Frequently asked questions
What formula does the Cast Iron Pipe Friction Loss Calculator use?+
It computes h_f = f·(L/D)·V²/2g with ε = 0.26 mm (cast iron), water 20 °C, per Moody chart roughness values — Crane TP-410. The formula is displayed under the result.
What should I keep in mind when using this calculator?+
Roughness 0.26 mm: new cast iron; tuberculated old mains can reach ε of several mm.
Can I use this for pump selection?+
Use it to establish the duty (flow, head, NPSH, power) and then pick a pump whose curve passes through that point near best efficiency. The tool gives you the engineering numbers a supplier will ask for.
Is the Cast Iron Pipe Friction Loss Calculator free to use?+
Yes — completely free, no sign-up, no limits. It runs client-side in your browser, so inputs stay private and results are instant even on slow connections.
Related Engineering tools
Reynolds Number Calculator
Compute Re from density, velocity, pipe diameter and viscosity — with instant laminar/turbulent classification.
● LiveLaminar vs Turbulent Flow Classifier
Classify hydraulic-oil or process-fluid flow regime from kinematic viscosity, line velocity and tube bore.
● LiveBernoulli Equation Solver
Solve downstream pressure between two points from velocities, elevations and fluid density (ideal, lossless).
● Live