Mix Quantities — M5 (1:5:10) Levelling Course
Cement bags, sand and aggregate for M5 (1:5:10) Levelling Course from wet volume with yield factor.
M5 is barely concrete — a cemented working platform. One bag yields a lot of volume at 1:5:10, the entire point: cheap, screedable cover over soft ground so the real foundation gets cast on something clean and dry.
Formula
Note: Planning estimate only — strength for structural decisions (formwork striking, post-tensioning, loading) must be verified by site-cured specimens or a calibrated maturity system per the project specification.
Cement bags, sand and aggregate for M5 (1:5:10) Levelling Course from wet volume with yield factor. A free concrete curing, maturity & strength tool — no sign-up, no upload, instant results in your browser.
About Mix Quantities — M5 (1:5:10) Levelling Course
Mix Quantities — M5 (1:5:10) Levelling Course computes the governing relationship dry vol = wet × factor; split 1:5:10; cement at 1,440 kg/m³; water = w/c × cement live as you type. M5 is barely concrete — a cemented working platform. One bag yields a lot of volume at 1:5:10, the entire point: cheap, screedable cover over soft ground so the real foundation gets cast on something clean and dry. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use Mix Quantities — M5 (1:5:10) Levelling Course
- 1Enter your values — Wet (finished) volume, Dry volume factor, Water-cement ratio, Wastage (sensible defaults are pre-filled).
- 2Read the live results: Cement (50 kg bags), Sand, Coarse aggregate, Water.
- 3Check the "with your numbers" line to see dry vol = wet × factor; split 1:5:10; cement at 1,440 kg/m³; water = w/c × cement substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use Mix Quantities — M5 (1:5:10) Levelling Course?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula dry vol = wet × factor; split 1:5:10; cement at 1,440 kg/m³; water = w/c × cement with authoritative sources cited on the page (IS 456:2000 — Plain and reinforced concrete code of practice; IS 10262 — Concrete mix proportioning guidelines)
- ✓M5 is barely concrete — a cemented working platform.
- ✓SI ⇄ Imperial toggle converts your inputs in place, so you can work in the units your drawings use
Frequently asked questions
What formula does the mix quantities — m5 (1:5:10) levelling course use?+
It evaluates dry vol = wet × factor; split 1:5:10; cement at 1,440 kg/m³; water = w/c × cement, exactly as published. Sources: IS 456:2000 — Plain and reinforced concrete code of practice; IS 10262 — Concrete mix proportioning guidelines. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
M5 is barely concrete — a cemented working platform. Planning estimate only — strength for structural decisions (formwork striking, post-tensioning, loading) must be verified by site-cured specimens or a calibrated maturity system per the project specification.
When is this calculator the right tool for the job?+
Cement bags, sand and aggregate for M5 (1:5:10) Levelling Course from wet volume with yield factor. A free concrete curing, maturity & strength tool. One bag yields a lot of volume at 1:5:10, the entire point: cheap, screedable cover over soft ground so the real foundation gets cast on something clean and dry. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Does it support both metric and imperial units?+
Yes — the SI ⇄ Imperial toggle converts the values already in the fields, preserving the physical quantity, so you can flip mid-calculation without re-entering anything.
Related tools
- Mix Quantities — M7.5 (1:4:8) Bedding
- Mix Quantities — M10 (1:3:6) Blinding/PCC
- Mix Quantities — M15 (1:2:4) Paths & Floors
- Mix Quantities — M20 (1:1.5:3) RCC Limit
- Mix Quantities — Dry Lean Concrete (Pavement Base)
- Mix Quantities — Floor Screed (1:4 Cement:Sand)
- Mix Quantities — Plaster Mortar (1:6)
- Lift Planning — CG from Two Scale Readings
- Tunnel Ventilation — TBM Drive
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live