Capacity Check — Crawler Crane
Gross-load vs chart utilization for a crawler crane, with rigging weight and dynamic allowance included.
Crawlers trade road mobility for pick-and-carry: many charts include travel-with-load columns mobiles can't offer. Those columns assume firm level ground and the load over the front idlers — the utilization math is identical, the ground-pressure homework (see the outrigger tools) doubles.
Formula
Note: Rigging and crane decisions are life-safety critical. This calculator is a planning aid — the load chart, sling tags, site lift plan and a qualified lift director govern every real lift.
Gross-load vs chart utilization for a crawler crane, with rigging weight and dynamic allowance included. A free crane load, wind & rigging safety tool — no sign-up, no upload, instant results in your browser.
About Capacity Check — Crawler Crane
Capacity Check — Crawler Crane computes the governing relationship gross = (net + rigging) × (1 + dynamic%) vs chart at radius live as you type. Crawlers trade road mobility for pick-and-carry: many charts include travel-with-load columns mobiles can't offer. Those columns assume firm level ground and the load over the front idlers — the utilization math is identical, the ground-pressure homework (see the outrigger tools) doubles. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use Capacity Check — Crawler Crane
- 1Enter your values — Net load, Rigging + block weight, Chart capacity at this radius/config, Dynamic allowance (sensible defaults are pre-filled).
- 2Read the live results: Gross design load, Chart utilization, Remaining margin.
- 3Check the "with your numbers" line to see gross = (net + rigging) × (1 + dynamic%) vs chart at radius substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use Capacity Check — Crawler Crane?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula gross = (net + rigging) × (1 + dynamic%) vs chart at radius with authoritative sources cited on the page (ASME B30.5/B30.9/B30.20 — Cranes, slings and below-the-hook devices; OSHA 29 CFR 1926 Subpart CC — Cranes & derricks in construction)
- ✓Crawlers trade road mobility for pick-and-carry: many charts include travel-with-load columns mobiles can't offer.
- ✓SI ⇄ Imperial toggle converts your inputs in place, so you can work in the units your drawings use
Frequently asked questions
What formula does the capacity check — crawler crane use?+
It evaluates gross = (net + rigging) × (1 + dynamic%) vs chart at radius, exactly as published. Sources: ASME B30.5/B30.9/B30.20 — Cranes, slings and below-the-hook devices; OSHA 29 CFR 1926 Subpart CC — Cranes & derricks in construction. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
Crawlers trade road mobility for pick-and-carry: many charts include travel-with-load columns mobiles can't offer. Rigging and crane decisions are life-safety critical. This calculator is a planning aid — the load chart, sling tags, site lift plan and a qualified lift director govern every real lift.
When is this calculator the right tool for the job?+
Gross-load vs chart utilization for a crawler crane, with rigging weight and dynamic allowance included. A free crane load, wind & rigging safety tool. Those columns assume firm level ground and the load over the front idlers — the utilization math is identical, the ground-pressure homework (see the outrigger tools) doubles. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Does it support both metric and imperial units?+
Yes — the SI ⇄ Imperial toggle converts the values already in the fields, preserving the physical quantity, so you can flip mid-calculation without re-entering anything.
Related tools
- Capacity Check — Rough-Terrain Crane
- Capacity Check — Overhead Bridge Crane
- Capacity Check — Rubber-Tyred Gantry (RTG)
- Capacity Check — Loader (Knuckle-Boom) Crane
- Wind Force on Load — Formwork Table
- Wind Force on Load — Façade/Cladding Panel
- Wind Force on Load — Precast Wall Panel
- Diesel Airflow — Personnel Carrier
- Asphalt Tonnage — Mill & Overlay
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live