Machine & Energy — Press Hourly Rate
Press Hourly Rate for injection molding operations.
The press rate is the denominator of every quote in the plant — and the most-fudged number in molding. Build it bottom-up once a year: machines that 'cost' $45/h in the quoting sheet and $68/h in reality explain a lot of busy-but-broke molders.
Formula
Note: Starting-point process values — the resin grade's datasheet and an in-mold study govern. Verify with a gate-seal study and a cooling-time ladder on the actual tool.
Disclaimer: This tool is for general informational and estimation purposes only and is not professional financial, tax, accounting or legal advice. All figures are estimates — verify with a qualified professional before making decisions. Read the full disclaimer.
Press Hourly Rate for injection molding operations. A free injection molding cycle & process tool — no sign-up, no upload, instant results in your browser.
About Machine & Energy — Press Hourly Rate
Machine & Energy — Press Hourly Rate computes the governing relationship rate = dep/h + kW×$/kWh + labour + overhead live as you type. The press rate is the denominator of every quote in the plant — and the most-fudged number in molding. Build it bottom-up once a year: machines that 'cost' $45/h in the quoting sheet and $68/h in reality explain a lot of busy-but-broke molders. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use Machine & Energy — Press Hourly Rate
- 1Enter your values — Machine installed price, Depreciation life, Production hours/yr, Average power draw and more (sensible defaults are pre-filled).
- 2Read the live results: Press rate.
- 3Check the "with your numbers" line to see rate = dep/h + kW×$/kWh + labour + overhead substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use Machine & Energy — Press Hourly Rate?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula rate = dep/h + kW×$/kWh + labour + overhead with authoritative sources cited on the page (Rosato, Injection Molding Handbook, 3rd ed.; Osswald & Hernández-Ortiz, Polymer Processing — Modeling and Simulation)
- ✓The press rate is the denominator of every quote in the plant — and the most-fudged number in molding.
- ✓Niche-specific defaults give a meaningful worked answer the moment the page loads
Frequently asked questions
What formula does the machine & energy — press hourly rate use?+
It evaluates rate = dep/h + kW×$/kWh + labour + overhead, exactly as published. Sources: Rosato, Injection Molding Handbook, 3rd ed.; Osswald & Hernández-Ortiz, Polymer Processing — Modeling and Simulation. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
The press rate is the denominator of every quote in the plant — and the most-fudged number in molding. Starting-point process values — the resin grade's datasheet and an in-mold study govern. Verify with a gate-seal study and a cooling-time ladder on the actual tool.
When is this calculator the right tool for the job?+
Press Hourly Rate for injection molding operations. A free injection molding cycle & process tool. Build it bottom-up once a year: machines that 'cost' $45/h in the quoting sheet and $68/h in reality explain a lot of busy-but-broke molders. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Do I need to install anything or create an account?+
No. The tool is pure client-side JavaScript: open the page and it works, offline once loaded, with no account, no quota and no data leaving your device.
Related tools
- Machine & Energy — Molded Part Cost
- Machine & Energy — Molding OEE
- Machine & Energy — Mold Change (SMED) Value
- Machine & Energy — Automation Payback (Picker/Robot)
- Machine & Energy — Color Change & Purge Cost
- Process & QC — Barrel Residence Time
- Process & QC — Gate Seal Study Planner
- Roller Chain Length Calculator
- Surface Finish Predictor — Rough Turning Steel
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live