Rectangular Weir Flow Calculator
Field flow measurement (Francis rectangular weir) with accuracy notes.
The Francis formula turns a board with a rectangular notch into a ±5% flow meter: Q = 1.84·b·h^1.5. Build the weir, let the flow settle, measure the head — hydrometry from 1883 that still runs the world's intakes.
Field-grade accuracy: bucket ±5%, weir ±5–10%, float ±15–25%. Measure in the dry season too — the dependable flow, not the monsoon flow, sizes the turbine or the water right. Repeat three times and average.
Engineering estimate from published standards and typical equipment data. Site conditions, equipment datasheets and measured data govern the real result — confirm with a qualified engineer.
Use the free Rectangular Weir Flow Calculator online — Field flow measurement (Francis rectangular weir) with accuracy notes. Runs instantly in your browser: no signup, no upload, mobile-friendly.
About Rectangular Weir Flow Calculator
The Francis formula turns a board with a rectangular notch into a ±5% flow meter: Q = 1.84·b·h^1.5. Build the weir, let the flow settle, measure the head — hydrometry from 1883 that still runs the world's intakes.
How to use Rectangular Weir Flow Calculator
- 1Set up the measurement per the method's field notes.
- 2Enter the measured dimensions/times.
- 3Read the flow in L/s and m³/day; repeat thrice and average.
Why use Rectangular Weir Flow Calculator?
- ✓Field methods that need a bucket, a tape and honesty — no instruments
- ✓Method-correct formulas: Francis weir, V-notch, float correction
- ✓Accuracy expectations stated, not implied
- ✓Per-hour and per-day conversions for water planning
Frequently asked questions
How do I measure stream or pipe flow without instruments?+
Three field classics: bucket-and-stopwatch for small flows (±5%), a temporary weir with a head measurement (±5–10%), or the float method — width × depth × surface speed × 0.85 (±15–25%). This tool computes whichever you set up; three repetitions averaged is the professional habit.
When should I measure flow for a project decision?+
At the worst honest time: the dry-season minimum decides hydro capacity, well yield and water rights — the monsoon number only decides flood protection. One measurement per season for a year builds the curve that sizing deserves; one impressive July reading builds disappointment.
How does the float method correction work?+
Surface water travels faster than the average across the section (friction slows the bed and banks), so surface-float speed × ~0.85 approximates mean velocity. Use a straight, uniform 10 m reach, an almost-submerged float (orange peel works), and several depth points for the average.
Why does a weir measure flow so well?+
It forces all water through a geometry where flow and head relate by physics: Q = 1.84·b·h^1.5 (rectangular) or 1.4·h^2.5 (90° V-notch). One ruler reading of head over the crest gives ±5% accuracy — which is why intakes and labs still use 19th-century weirs.
Embed Rectangular Weir Flow Calculator on your website
Want Rectangular Weir Flow Calculatoron your own site? Paste this snippet into any HTML page — it's free, with no API key or sign-up. The tool loads in an iframe and keeps working exactly as it does here.
<iframe src="https://tooljolt.com/tools/rectangular-weir-flow-calculator" width="100%" height="640" style="border:1px solid #e5e7eb;border-radius:12px;max-width:680px" title="Rectangular Weir Flow Calculator — ToolJolt" loading="lazy"></iframe>Related Energy tools
Rooftop Solar Calculator — Rajasthan
Estimate yearly kWh and bill savings from a rooftop solar system in Rajasthan using local irradiance (5.8 kWh/m²/day) and tariffs.
● LiveRooftop Solar Calculator — Gujarat
Estimate yearly kWh and bill savings from a rooftop solar system in Gujarat using local irradiance (5.6 kWh/m²/day) and tariffs.
● LiveRooftop Solar Calculator — Maharashtra
Estimate yearly kWh and bill savings from a rooftop solar system in Maharashtra using local irradiance (5.3 kWh/m²/day) and tariffs.
● Live