Payload Torque Check — Arc-Welding 6-Axis (8 kg)
Static shoulder moment for a arc-welding 6-axis (8 kg) from payload, reach and arm mass — the gearbox-sizing number.
Eight kilograms covers torch, cable assembly and wire — but the cable drag is the real torque story, a fluctuating tug the payload spec never shows. Keep calculated static margin above 40% so the dress-pack's moods don't excite path errors at the weld pool.
Formula
Note: Planning-level engineering estimate — final robot selection, guarding layout and risk assessment must follow the integrator's calculations and a documented ISO 12100/10218 risk assessment.
Static shoulder moment for a arc-welding 6-axis (8 kg) from payload, reach and arm mass — the gearbox-sizing number. A free industrial robot kinematics & cell design tool — no sign-up, no upload, instant results in your browser.
About Payload Torque Check — Arc-Welding 6-Axis (8 kg)
Payload Torque Check — Arc-Welding 6-Axis (8 kg) computes the governing relationship M = m_p·(g+a)·r + m_arm·(g+a)·0.45r live as you type. Eight kilograms covers torch, cable assembly and wire — but the cable drag is the real torque story, a fluctuating tug the payload spec never shows. Keep calculated static margin above 40% so the dress-pack's moods don't excite path errors at the weld pool. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use Payload Torque Check — Arc-Welding 6-Axis (8 kg)
- 1Enter your values — Payload (incl. gripper), Horizontal reach to load CG, Arm moving mass, Vertical acceleration (sensible defaults are pre-filled).
- 2Read the live results: Shoulder moment, Gravity-only moment, Payload share of moment.
- 3Check the "with your numbers" line to see M = m_p·(g+a)·r + m_arm·(g+a)·0.45r substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use Payload Torque Check — Arc-Welding 6-Axis (8 kg)?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula M = m_p·(g+a)·r + m_arm·(g+a)·0.45r with authoritative sources cited on the page (Siciliano & Khatib (eds.), Springer Handbook of Robotics, 2nd ed.; ISO 9283 — Manipulating industrial robots: performance criteria)
- ✓Eight kilograms covers torch, cable assembly and wire — but the cable drag is the real torque story, a fluctuating tug the payload spec never shows.
- ✓SI ⇄ Imperial toggle converts your inputs in place, so you can work in the units your drawings use
Frequently asked questions
What formula does the payload torque check — arc-welding 6-axis (8 kg) use?+
It evaluates M = m_p·(g+a)·r + m_arm·(g+a)·0.45r, exactly as published. Sources: Siciliano & Khatib (eds.), Springer Handbook of Robotics, 2nd ed.; ISO 9283 — Manipulating industrial robots: performance criteria. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
Eight kilograms covers torch, cable assembly and wire — but the cable drag is the real torque story, a fluctuating tug the payload spec never shows. Planning-level engineering estimate — final robot selection, guarding layout and risk assessment must follow the integrator's calculations and a documented ISO 12100/10218 risk assessment.
When is this calculator the right tool for the job?+
Static shoulder moment for a arc-welding 6-axis (8 kg) from payload, reach and arm mass. Keep calculated static margin above 40% so the dress-pack's moods don't excite path errors at the weld pool. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Does it support both metric and imperial units?+
Yes — the SI ⇄ Imperial toggle converts the values already in the fields, preserving the physical quantity, so you can flip mid-calculation without re-entering anything.
Related tools
- Payload Torque Check — Cartesian Gantry (50 kg)
- TCP Speed Estimator — SCARA (400 mm class)
- TCP Speed Estimator — 6-Axis Benchtop (5 kg)
- TCP Speed Estimator — Collaborative Robot (5 kg)
- TCP Speed Estimator — Heavy Cobot (16 kg)
- TCP Speed Estimator — 6-Axis Industrial (20 kg)
- TCP Speed Estimator — Palletizing Robot (160 kg)
- Formwork Striking Time — PT Slab (Strike After Stressing)
- Wind Force on Load — Tree Section (Crane Removal)
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live