RPM → RCF Calculator (plasma preparation)
Convert centrifuge speed (RPM) to relative centrifugal force (×g) for plasma preparation, using your rotor radius. Always report ×g, not RPM, for reproducibility.
- 1Convert radius to cm
175 mm = 17.5 cm - 2RCF = 1.118×10⁻⁵ · r · RPM²
RCF = 783 ×g
🔒 100% client-side — your data is computed in the browser and never uploaded.
Cite this tool
ToolJolt. RPM → RCF Calculator (plasma preparation). ToolJolt Chemistry & Lab Tools; 2026. https://tooljolt.comA no-nonsense rpm → rcf calculator (plasma preparation) built for centrifugation. It shows the substituted formula, not just the answer, so you can check the working.
About RPM → RCF Calculator (plasma preparation)
Convert centrifuge speed (RPM) to relative centrifugal force (×g) for plasma preparation, using your rotor radius. Always report ×g, not RPM, for reproducibility. The calculation uses RCF = 1.118×10⁻⁵ · r(cm) · RPM². Why it matters: Protocols specify relative centrifugal force (×g), but instruments are set in RPM. Because RCF depends on the square of speed and on rotor radius, the same RPM gives very different g-force on different rotors — get it wrong and you over-pellet, shear, or fail to sediment. For plasma preparation, a typical setting is ~500 ×g. Before you trust the number, double-check: copying an RPM from a protocol written for a different rotor; using rmin instead of rmax; forgetting radius is in cm in the formula. Everything is computed on your own device — nothing you enter is uploaded — so the tool is safe for unpublished sequences, proprietary formulations and sensitive measurements, and easy to cite in a methods section or lab SOP.
How to use RPM → RCF Calculator (plasma preparation)
- 1Enter your values: Rotor speed, Rotor radius (rmax).
- 2Read the headline result and the supporting figures, which recompute as you type.
- 3Open “Worked example with your numbers” to see the substituted formula step by step.
- 4Copy the result, or use the cite-this-tool snippet for your methods section.
Why use RPM → RCF Calculator (plasma preparation)?
- ✓Built on a sourced, unit-tested formula for centrifugation
- ✓Links to related centrifugation calculators so you can finish the whole workflow
- ✓Copy-ready result and a one-line “cite this tool” snippet for your methods section
- ✓Designed for anyone running a centrifuge — from students to core-facility staff who need a trustworthy answer fast
- ✓Instant, client-side result — works offline once loaded and keeps your data private
Frequently asked questions
Any tips specific to this calculation?+
For plasma preparation, a typical setting is ~500 ×g. Also watch out for: copying an RPM from a protocol written for a different rotor and not balancing tubes.
Is this rpm → rcf calculator (plasma preparation) free to use?+
Yes. It is completely free, needs no sign-up, and runs entirely in your browser — there are no usage limits.
What formula does it use?+
It uses RCF = 1.118×10⁻⁵ · r(cm) · RPM² The full worked example is shown beneath the result so you can verify each step.
What are the most common mistakes here?+
In centrifugation, watch for: copying an RPM from a protocol written for a different rotor; using rmin instead of rmax; forgetting radius is in cm in the formula; not balancing tubes. This tool shows the working so you can catch these before they cost an experiment.
Does my data leave my device?+
No. All computation happens locally in your browser. Nothing you enter — sequences, concentrations or measurements — is uploaded to any server, so it is safe for confidential work.
Can I cite this tool?+
Yes — use the “Cite this tool” snippet on the page. Many users link these calculators from methods sections, lab SOPs and teaching materials.
Related tools
Related Chemistry tools
Sodium Chloride (NaCl) Molarity Calculator
Calculate the molarity (mol/L) of a Sodium Chloride (NaCl) solution from the mass you weighed out and your final volume — shows the working and the millimolar value.
● LivePotassium Chloride (KCl) Molarity Calculator
Calculate the molarity (mol/L) of a Potassium Chloride (KCl) solution from the mass you weighed out and your final volume — shows the working and the millimolar value.
● LiveD-Glucose Molarity Calculator
Calculate the molarity (mol/L) of a D-Glucose solution from the mass you weighed out and your final volume — shows the working and the millimolar value.
● Live