Process & QC — Scrap Rate Cost
Scrap Rate Cost for injection molding process control.
Scrap percentage feels small until multiplied by annual volume: 4% on two million parts is 80,000 rejects whose machine time no regrind recovers. The recovery field is honest — regrind saves resin value only; the cycle seconds are gone forever.
Formula
Note: Starting-point process values — the resin grade's datasheet and an in-mold study govern. Verify with a gate-seal study and a cooling-time ladder on the actual tool.
Disclaimer: This tool is for general informational and estimation purposes only and is not professional financial, tax, accounting or legal advice. All figures are estimates — verify with a qualified professional before making decisions. Read the full disclaimer.
Scrap Rate Cost for injection molding process control. A free injection molding cycle & process tool — no sign-up, no upload, instant results in your browser.
About Process & QC — Scrap Rate Cost
Process & QC — Scrap Rate Cost computes the governing relationship loss = parts × scrap% × cost × (1 − recovery) live as you type. Scrap percentage feels small until multiplied by annual volume: 4% on two million parts is 80,000 rejects whose machine time no regrind recovers. The recovery field is honest — regrind saves resin value only; the cycle seconds are gone forever. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use Process & QC — Scrap Rate Cost
- 1Enter your values — Scrap rate, Annual production, Cost per part, Value recovered as regrind (sensible defaults are pre-filled).
- 2Read the live results: Annual scrap loss.
- 3Check the "with your numbers" line to see loss = parts × scrap% × cost × (1 − recovery) substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use Process & QC — Scrap Rate Cost?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula loss = parts × scrap% × cost × (1 − recovery) with authoritative sources cited on the page (Rosato, Injection Molding Handbook, 3rd ed.; Osswald & Hernández-Ortiz, Polymer Processing — Modeling and Simulation)
- ✓Scrap percentage feels small until multiplied by annual volume: 4% on two million parts is 80,000 rejects whose machine time no regrind recovers.
- ✓Niche-specific defaults give a meaningful worked answer the moment the page loads
Frequently asked questions
What formula does the process & qc — scrap rate cost use?+
It evaluates loss = parts × scrap% × cost × (1 − recovery), exactly as published. Sources: Rosato, Injection Molding Handbook, 3rd ed.; Osswald & Hernández-Ortiz, Polymer Processing — Modeling and Simulation. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
Scrap percentage feels small until multiplied by annual volume: 4% on two million parts is 80,000 rejects whose machine time no regrind recovers. Starting-point process values — the resin grade's datasheet and an in-mold study govern. Verify with a gate-seal study and a cooling-time ladder on the actual tool.
When is this calculator the right tool for the job?+
Scrap Rate Cost for injection molding process control. A free injection molding cycle & process tool. The recovery field is honest — regrind saves resin value only; the cycle seconds are gone forever. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Do I need to install anything or create an account?+
No. The tool is pure client-side JavaScript: open the page and it works, offline once loaded, with no account, no quota and no data leaving your device.
Related tools
- Process & QC — Masterbatch Dosing
- Process & QC — Intensification Ratio & Plastic Pressure
- Process & QC — Shot Weight Consistency (Cpk)
- Process & QC — Mold Maintenance Interval
- Cooling Time — Polypropylene (PP)
- Cooling Time — HDPE
- Cooling Time — ABS
- V-Belt Length Calculator
- Drilling Speed & Feed — Gray Cast Iron
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live