Tank mix (general) Spray Dilution Calculator
Work out exactly how much tank mix (general) to add per sprayer tank and for the whole field, from the label dose per acre and your spray volume.
When mixing products, add them in the order: water-soluble bags, then wettable powders, then suspensions, then emulsifiable concentrates, then adjuvants — agitating throughout.
Always follow the product label — the label is the law. Verify doses, PHI and compatibility with the manufacturer and local regulations before spraying.
Farmers and spray operators use the free Tank mix (general) Spray Dilution Calculator to mix the correct amount per tank — avoiding the under-dosing that wastes a spray and the over-dosing that wastes money, harms the crop and breaches residue limits.
About Tank mix (general) Spray Dilution Calculator
Getting pesticide dilution right is the difference between control and a wasted, possibly harmful spray. For any agrochemical, the per-tank dose = label dose per acre × tank size ÷ spray volume per acre. This calculator takes the label dose per acre, your spray volume per acre and your tank size, and works out how much tank mix (general) to add to each tank, the total product for the field, the concentration per litre and the number of tank loads. The product label always takes precedence — doses here are typical values to plan with.
How to use Tank mix (general) Spray Dilution Calculator
- 1Enter the label dose per acre and your spray volume per acre.
- 2Enter your sprayer tank size and the area to spray.
- 3Measure out the tank mix (general) per tank shown and spray with full coverage and PPE.
Why use Tank mix (general) Spray Dilution Calculator?
- ✓Converts the per-acre dose into a per-tank amount instantly
- ✓Gives total product, total water and tank loads for the field
- ✓Works for any tank size and spray volume
- ✓Free, instant and fully in-browser — works offline in the field
Frequently asked questions
How much tank mix (general) do I add per litre of water?+
For any agrochemical, the per-tank dose = label dose per acre × tank size ÷ spray volume per acre. The exact rate is on your product's label — divide the label dose per acre by your spray volume per acre to get the per-litre concentration, which this tool does for you.
How do I calculate tank mix (general) per sprayer tank?+
Per-tank dose = label dose per acre × tank size ÷ spray volume per acre. For example, 400 ml/acre at 200 L/acre in a 15 L tank is about 30 ml per tank.
Why must I follow the label dose exactly?+
When mixing products, add them in the order: water-soluble bags, then wettable powders, then suspensions, then emulsifiable concentrates, then adjuvants — agitating throughout. Over-dosing breaches Maximum Residue Limits (MRLs) and can be illegal; under-dosing fails to control the pest and breeds resistance. The label is legally binding.
Is this tool free and private?+
Yes — free, no sign-up, and all calculation runs in your browser, so it works offline in the field and your data never leaves the device.
Related Agri tools
Tractor Fuel Consumption Calculator
Estimate your tractor's diesel consumption per hour from its horsepower, load and specific fuel consumption.
● LiveTractor Fuel Cost Per Acre Calculator
Convert your tractor's fuel use per hour into diesel litres and cost per acre for any field operation.
● LiveImplement Field Capacity Calculator
Calculate the effective field capacity (ha/h and acres/h) of any implement from width, speed and field efficiency.
● Live