Water-Cement Ratio & Strength — Lean Mix / Blinding (M10)
28-day strength from w/c via Abrams' law, preset for a lean mix / blinding (m10) (none exposure).
Blinding concrete just needs to be walkable and level — strength is a courtesy. At w/c 0.65 Abrams returns single-digit-teens MPa, which is the point: cement saved here funds quality where it matters. Don't let the structural mix's habits inflate the blinding spec.
Formula
Note: Planning estimate only — strength for structural decisions (formwork striking, post-tensioning, loading) must be verified by site-cured specimens or a calibrated maturity system per the project specification.
28-day strength from w/c via Abrams' law, preset for a lean mix / blinding (m10) (none exposure). A free concrete curing, maturity & strength tool — no sign-up, no upload, instant results in your browser.
About Water-Cement Ratio & Strength — Lean Mix / Blinding (M10)
Water-Cement Ratio & Strength — Lean Mix / Blinding (M10) computes the governing relationship f'c = A / B^(w/c) [Abrams, 1918] live as you type. Blinding concrete just needs to be walkable and level — strength is a courtesy. At w/c 0.65 Abrams returns single-digit-teens MPa, which is the point: cement saved here funds quality where it matters. Don't let the structural mix's habits inflate the blinding spec. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use Water-Cement Ratio & Strength — Lean Mix / Blinding (M10)
- 1Enter your values — Water-cement ratio, Abrams constant A, Abrams constant B (sensible defaults are pre-filled).
- 2Read the live results: Predicted 28-day strength, If +0.05 water (w/c +0.05).
- 3Check the "with your numbers" line to see f'c = A / B^(w/c) [Abrams, 1918] substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use Water-Cement Ratio & Strength — Lean Mix / Blinding (M10)?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula f'c = A / B^(w/c) [Abrams, 1918] with authoritative sources cited on the page (Neville, A.M., Properties of Concrete, 5th ed.; IS 456:2000 — Plain and reinforced concrete code of practice)
- ✓Blinding concrete just needs to be walkable and level — strength is a courtesy.
- ✓SI ⇄ Imperial toggle converts your inputs in place, so you can work in the units your drawings use
Frequently asked questions
What formula does the water-cement ratio & strength — lean mix / blinding (m10) use?+
It evaluates f'c = A / B^(w/c) [Abrams, 1918], exactly as published. Sources: Neville, A.M., Properties of Concrete, 5th ed.; IS 456:2000 — Plain and reinforced concrete code of practice. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
Blinding concrete just needs to be walkable and level — strength is a courtesy. Planning estimate only — strength for structural decisions (formwork striking, post-tensioning, loading) must be verified by site-cured specimens or a calibrated maturity system per the project specification.
When is this calculator the right tool for the job?+
28-day strength from w/c via Abrams' law, preset for a lean mix / blinding (m10) (none exposure). A free concrete curing, maturity & strength tool. At w/c 0.65 Abrams returns single-digit-teens MPa, which is the point: cement saved here funds quality where it matters. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Does it support both metric and imperial units?+
Yes — the SI ⇄ Imperial toggle converts the values already in the fields, preserving the physical quantity, so you can flip mid-calculation without re-entering anything.
Related tools
- Plastic Shrinkage Risk — Warehouse Floor Slab
- Plastic Shrinkage Risk — Bridge Deck Pour
- Plastic Shrinkage Risk — Desert Pavement (Dawn Pour)
- Plastic Shrinkage Risk — Windy Coastal Slab
- Plastic Shrinkage Risk — Night Pour Verification
- Plastic Shrinkage Risk — Fogging System Trigger
- Plastic Shrinkage Risk — Thin Bonded Topping
- Wind at Hook Height — Wind Farm Construction
- Fan Engineering — Annual Fan Energy Cost
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live