Port of Seattle–Tacoma Demurrage Calculator
Estimate import container demurrage at the Port of Seattle–Tacoma (USA) with editable free time and tariff tiers.
Set a tier's days to 0 to mean “all remaining days”.
Example tariff shaped for Seattle–Tacoma import flows — replace with your carrier's published USA tariff or service-contract terms for exact figures.
With your numbers: 10 days − 4 free = 6 chargeable days = 3×$140 + 3×$220 = $1,080 per container.
Sources & references
- Port of Seattle–Tacoma / terminal operator published tariff (storage & free time)
- Carrier demurrage & detention tariff for the relevant trade lane
Demurrage, detention and storage tariffs are set by each carrier, terminal and contract and change frequently. The preloaded figures are editable industry-typical examples, not quotes — always verify against the current published tariff or your service contract before paying or disputing an invoice.
The Port of Seattle–Tacoma is the Northwest Seaport Alliance — two harbors marketed as one gateway, strong in trans-Pacific and Alaska trades. When an import container overstays its free time here, the carrier's demurrage clock prices every extra day in escalating tiers — this calculator reproduces that math for Seattle–Tacoma pickups so the invoice never surprises you.
About Port of Seattle–Tacoma Demurrage Calculator
NWSA terminals' published free time has periodically been cut during peak seasons to keep velocity up. The preloaded example uses 4 free days and tiers of $140×3d, $220×4d, $310+ — realistic for this gateway but deliberately editable, because your service contract or the terminal's current schedule is the only tariff that counts. Use it three ways: before vessel arrival, to budget worst-case dwell; at the last-free-day decision point, to price one more day of waiting against premium drayage; and after the invoice, to audit the carrier's day count and tier application line by line. Most recovered demurrage money comes from that third pass.
How to use Port of Seattle–Tacoma Demurrage Calculator
- 1Enter days since discharge and how many containers are affected.
- 2Set your free days and edit the tariff tiers to match the published tariff or your contract — every figure is editable.
- 3Read the per-tier breakdown and the worked example showing exactly how the total is built, day by day.
- 4Change the inputs to compare scenarios (pick up now vs later) before the charges harden into an invoice.
Why use Port of Seattle–Tacoma Demurrage Calculator?
- ✓Per-tier breakdown mirrors how carrier and terminal billing systems itemise invoices
- ✓Every figure — free time, tier days, rates — is editable to match any published tariff
- ✓Instant what-if comparisons before charges harden into an invoice
- ✓Free and private — all math runs in your browser
Frequently asked questions
How much demurrage would a container at Seattle–Tacoma owe after 10 days?+
Under the preloaded example (4 free days, then $140 for 3d, $220 for 4d, $310 after): 6 chargeable days = 3 × $140 + 3 × $220 = $1,080 per container. Your tariff's actual brackets may differ — edit the tiers to match before relying on the figure.
When does free time start counting at Seattle–Tacoma?+
Per your carrier's tariff — typically from container discharge or from when it becomes available for pickup (which can lag discharge during big exchanges). The trigger definition is the first thing to check on a disputed invoice: a one-day difference in the start date often equals a whole top-tier day at the end.
Is free time the same at Seattle and Tacoma harbors?+
They market jointly as NWSA but terminals set their own storage schedules, and carrier demurrage applies by tariff regardless of harbor. Peak-season free-time reductions have hit both harbors — re-confirm the current free days on the terminal site each season rather than assuming last year's, then set the free-days field above accordingly.
Demurrage vs detention — which one is this?+
This models demurrage: the box inside the Seattle–Tacoma terminal past free time. Detention/per diem — the clock after gate-out until empty return — runs on separate free time and rates. Use our container detention calculator for that leg; on a slow door move you may genuinely owe both.
Embed Port of Seattle–Tacoma Demurrage Calculator on your website
Want Port of Seattle–Tacoma Demurrage Calculatoron your own site? Paste this snippet into any HTML page — it's free, with no API key or sign-up. The tool loads in an iframe and keeps working exactly as it does here.
<iframe src="https://tooljolt.com/tools/port-of-seattle-tacoma-demurrage-calculator" width="100%" height="640" style="border:1px solid #e5e7eb;border-radius:12px;max-width:680px" title="Port of Seattle–Tacoma Demurrage Calculator — ToolJolt" loading="lazy"></iframe>Related tools
Related Logistics tools
Demurrage Calculator (Ocean Containers)
Work out ocean container demurrage from free days and a tiered terminal tariff — with a per-tier breakdown.
● LiveContainer Detention (Per Diem) Calculator
Calculate detention / per-diem owed on containers gated out but not yet returned empty to the depot.
● LiveTruck Driver Detention Fee Calculator
Price driver detention at the dock by the hour — free window, tiered hourly rates and multi-stop totals.
● Live