Payload Torque Check — 6-Axis Benchtop (5 kg)
Static shoulder moment for a 6-axis benchtop (5 kg) from payload, reach and arm mass — the gearbox-sizing number.
Five-kilogram benchtop arms quote payload at the flange with the wrist close-in; hang the same 5 kg on a 200 mm gripper and the shoulder torque demand can double. This calculator shows the moment arithmetic the datasheet footnote hides.
Formula
Note: Planning-level engineering estimate — final robot selection, guarding layout and risk assessment must follow the integrator's calculations and a documented ISO 12100/10218 risk assessment.
Static shoulder moment for a 6-axis benchtop (5 kg) from payload, reach and arm mass — the gearbox-sizing number. A free industrial robot kinematics & cell design tool — no sign-up, no upload, instant results in your browser.
About Payload Torque Check — 6-Axis Benchtop (5 kg)
Payload Torque Check — 6-Axis Benchtop (5 kg) computes the governing relationship M = m_p·(g+a)·r + m_arm·(g+a)·0.45r live as you type. Five-kilogram benchtop arms quote payload at the flange with the wrist close-in; hang the same 5 kg on a 200 mm gripper and the shoulder torque demand can double. This calculator shows the moment arithmetic the datasheet footnote hides. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use Payload Torque Check — 6-Axis Benchtop (5 kg)
- 1Enter your values — Payload (incl. gripper), Horizontal reach to load CG, Arm moving mass, Vertical acceleration (sensible defaults are pre-filled).
- 2Read the live results: Shoulder moment, Gravity-only moment, Payload share of moment.
- 3Check the "with your numbers" line to see M = m_p·(g+a)·r + m_arm·(g+a)·0.45r substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use Payload Torque Check — 6-Axis Benchtop (5 kg)?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula M = m_p·(g+a)·r + m_arm·(g+a)·0.45r with authoritative sources cited on the page (Siciliano & Khatib (eds.), Springer Handbook of Robotics, 2nd ed.; ISO 9283 — Manipulating industrial robots: performance criteria)
- ✓Five-kilogram benchtop arms quote payload at the flange with the wrist close-in; hang the same 5 kg on a 200 mm gripper and the shoulder torque demand can double.
- ✓SI ⇄ Imperial toggle converts your inputs in place, so you can work in the units your drawings use
Frequently asked questions
What formula does the payload torque check — 6-axis benchtop (5 kg) use?+
It evaluates M = m_p·(g+a)·r + m_arm·(g+a)·0.45r, exactly as published. Sources: Siciliano & Khatib (eds.), Springer Handbook of Robotics, 2nd ed.; ISO 9283 — Manipulating industrial robots: performance criteria. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
Five-kilogram benchtop arms quote payload at the flange with the wrist close-in; hang the same 5 kg on a 200 mm gripper and the shoulder torque demand can double. Planning-level engineering estimate — final robot selection, guarding layout and risk assessment must follow the integrator's calculations and a documented ISO 12100/10218 risk assessment.
When is this calculator the right tool for the job?+
Static shoulder moment for a 6-axis benchtop (5 kg) from payload, reach and arm mass. This calculator shows the moment arithmetic the datasheet footnote hides. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Does it support both metric and imperial units?+
Yes — the SI ⇄ Imperial toggle converts the values already in the fields, preserving the physical quantity, so you can flip mid-calculation without re-entering anything.
Related tools
- Payload Torque Check — Collaborative Robot (5 kg)
- Payload Torque Check — Heavy Cobot (16 kg)
- Payload Torque Check — 6-Axis Industrial (20 kg)
- Payload Torque Check — Palletizing Robot (160 kg)
- Payload Torque Check — Heavy 6-Axis (210 kg)
- Payload Torque Check — Delta Picker (1 kg)
- Payload Torque Check — Arc-Welding 6-Axis (8 kg)
- Formwork Striking Time — Beam Side Forms
- Wind Force on Load — Façade/Cladding Panel
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live