Welding — SMAW Field Rate
Weld metal, arc time and duration for smaw field rate at a stated deposition rate.
Stick remains the field's tool — wind-proof, position-tolerant, simple — at a deposition rate a third of flux-core. The arc-time fraction (30–40% on field work) is where the day actually goes.
Formula
Note: Erection-planning estimate only. Member weights, connection capacities and tolerances for execution must come from the issued drawings, the EOR and the erection engineer — never from a generic calculator.
Disclaimer: This tool is for general informational and estimation purposes only and is not professional financial, tax, accounting or legal advice. All figures are estimates — verify with a qualified professional before making decisions. Read the full disclaimer.
Weld metal, arc time and duration for smaw field rate at a stated deposition rate. A free structural steel delivery & erection tool — no sign-up, no upload, instant results in your browser.
About Welding — SMAW Field Rate
Welding — SMAW Field Rate computes the governing relationship A = leg²/2 · m = A·L·ρ × 1.1 reinforcement live as you type. Stick remains the field's tool — wind-proof, position-tolerant, simple — at a deposition rate a third of flux-core. The arc-time fraction (30–40% on field work) is where the day actually goes. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use Welding — SMAW Field Rate
- 1Enter your values — Fillet leg size, Total weld length, Deposition rate, Operator factor (sensible defaults are pre-filled).
- 2Read the live results: Weld metal, Welder-hours.
- 3Check the "with your numbers" line to see A = leg²/2 · m = A·L·ρ × 1.1 reinforcement substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use Welding — SMAW Field Rate?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula A = leg²/2 · m = A·L·ρ × 1.1 reinforcement with authoritative sources cited on the page (AWS D1.1 — Structural Welding Code (Steel))
- ✓Stick remains the field's tool — wind-proof, position-tolerant, simple — at a deposition rate a third of flux-core.
- ✓SI ⇄ Imperial toggle converts your inputs in place, so you can work in the units your drawings use
Frequently asked questions
What formula does the welding — smaw field rate use?+
It evaluates A = leg²/2 · m = A·L·ρ × 1.1 reinforcement, exactly as published. Sources: AWS D1.1 — Structural Welding Code (Steel). The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
Stick remains the field's tool — wind-proof, position-tolerant, simple — at a deposition rate a third of flux-core. Erection-planning estimate only. Member weights, connection capacities and tolerances for execution must come from the issued drawings, the EOR and the erection engineer — never from a generic calculator.
When is this calculator the right tool for the job?+
Weld metal, arc time and duration for smaw field rate at a stated deposition rate. A free structural steel delivery & erection tool. The arc-time fraction (30–40% on field work) is where the day actually goes. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Does it support both metric and imperial units?+
Yes — the SI ⇄ Imperial toggle converts the values already in the fields, preserving the physical quantity, so you can flip mid-calculation without re-entering anything.
Related tools
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live