TBM Advance Rate — Blocky Basalt
Daily and weekly advance for a TBM in blocky basalt from penetration, RPM and utilization.
Volcanics alternate massive flows with rubble zones — penetration swings 3× within a hundred metres. Plan with the average; staff for the extremes. Grippers in rubble zones are their own delay story.
Formula
Note: Planning-level tunnelling estimate — actual TBM performance is set by detailed geotechnical baseline data, machine design and the contractor's means & methods. Use for feasibility framing only.
Daily and weekly advance for a TBM in blocky basalt from penetration, RPM and utilization. A free tbm performance & tunnelling tool — no sign-up, no upload, instant results in your browser.
About TBM Advance Rate — Blocky Basalt
TBM Advance Rate — Blocky Basalt computes the governing relationship ROP = pen × RPM × 60/1000; AR = ROP × hours × utilization live as you type. Volcanics alternate massive flows with rubble zones — penetration swings 3× within a hundred metres. Plan with the average; staff for the extremes. Grippers in rubble zones are their own delay story. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use TBM Advance Rate — Blocky Basalt
- 1Enter your values — Penetration, Cutterhead speed, Utilization (boring share of time), Working hours per day (sensible defaults are pre-filled).
- 2Read the live results: Instantaneous rate, Daily advance, Weekly advance.
- 3Check the "with your numbers" line to see ROP = pen × RPM × 60/1000; AR = ROP × hours × utilization substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use TBM Advance Rate — Blocky Basalt?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula ROP = pen × RPM × 60/1000; AR = ROP × hours × utilization with authoritative sources cited on the page (NTNU prediction model — hard-rock TBM performance; Maidl et al., Mechanised Shield Tunnelling, 2nd ed.)
- ✓Volcanics alternate massive flows with rubble zones — penetration swings 3× within a hundred metres.
- ✓Niche-specific defaults give a meaningful worked answer the moment the page loads
Frequently asked questions
What formula does the tbm advance rate — blocky basalt use?+
It evaluates ROP = pen × RPM × 60/1000; AR = ROP × hours × utilization, exactly as published. Sources: NTNU prediction model — hard-rock TBM performance; Maidl et al., Mechanised Shield Tunnelling, 2nd ed.. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
Volcanics alternate massive flows with rubble zones — penetration swings 3× within a hundred metres. Planning-level tunnelling estimate — actual TBM performance is set by detailed geotechnical baseline data, machine design and the contractor's means & methods. Use for feasibility framing only.
When is this calculator the right tool for the job?+
Daily and weekly advance for a TBM in blocky basalt from penetration, RPM and utilization. A free tbm performance & tunnelling tool. Plan with the average; staff for the extremes. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Do I need to install anything or create an account?+
No. The tool is pure client-side JavaScript: open the page and it works, offline once loaded, with no account, no quota and no data leaving your device.
Related tools
- TBM Advance Rate — Fault Zone Crossing
- TBM Advance Rate — Urban Shallow Soft Ground
- Cutter Consumption — Quartzite (CAI ~5)
- Cutter Consumption — Granite (CAI ~4)
- Cutter Consumption — Gneiss (CAI ~3.5)
- Cutter Consumption — Quartz Sandstone (CAI ~3)
- Cutter Consumption — Limestone (CAI ~1.5)
- Cooling Time — PET (Preform Grade)
- Surface Roughness Converter (Ra ⇄ Rz, RMS, N grade)
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live