TBM Advance Rate — Limestone (UCS 80 MPa)
Daily and weekly advance for a TBM in limestone (ucs 80 mpa) from penetration, RPM and utilization.
Mid-strength sediments are TBM heaven: double-digit penetration, gentle wear, and utilization limited by logistics rather than geology. Records are set in rock like this.
Formula
Note: Planning-level tunnelling estimate — actual TBM performance is set by detailed geotechnical baseline data, machine design and the contractor's means & methods. Use for feasibility framing only.
Daily and weekly advance for a TBM in limestone (ucs 80 mpa) from penetration, RPM and utilization. A free tbm performance & tunnelling tool — no sign-up, no upload, instant results in your browser.
About TBM Advance Rate — Limestone (UCS 80 MPa)
TBM Advance Rate — Limestone (UCS 80 MPa) computes the governing relationship ROP = pen × RPM × 60/1000; AR = ROP × hours × utilization live as you type. Mid-strength sediments are TBM heaven: double-digit penetration, gentle wear, and utilization limited by logistics rather than geology. Records are set in rock like this. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use TBM Advance Rate — Limestone (UCS 80 MPa)
- 1Enter your values — Penetration, Cutterhead speed, Utilization (boring share of time), Working hours per day (sensible defaults are pre-filled).
- 2Read the live results: Instantaneous rate, Daily advance, Weekly advance.
- 3Check the "with your numbers" line to see ROP = pen × RPM × 60/1000; AR = ROP × hours × utilization substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use TBM Advance Rate — Limestone (UCS 80 MPa)?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula ROP = pen × RPM × 60/1000; AR = ROP × hours × utilization with authoritative sources cited on the page (NTNU prediction model — hard-rock TBM performance; Maidl et al., Mechanised Shield Tunnelling, 2nd ed.)
- ✓Mid-strength sediments are TBM heaven: double-digit penetration, gentle wear, and utilization limited by logistics rather than geology.
- ✓Niche-specific defaults give a meaningful worked answer the moment the page loads
Frequently asked questions
What formula does the tbm advance rate — limestone (ucs 80 mpa) use?+
It evaluates ROP = pen × RPM × 60/1000; AR = ROP × hours × utilization, exactly as published. Sources: NTNU prediction model — hard-rock TBM performance; Maidl et al., Mechanised Shield Tunnelling, 2nd ed.. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
Mid-strength sediments are TBM heaven: double-digit penetration, gentle wear, and utilization limited by logistics rather than geology. Planning-level tunnelling estimate — actual TBM performance is set by detailed geotechnical baseline data, machine design and the contractor's means & methods. Use for feasibility framing only.
When is this calculator the right tool for the job?+
Daily and weekly advance for a TBM in limestone (ucs 80 mpa) from penetration, RPM and utilization. A free tbm performance & tunnelling tool. Records are set in rock like this. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Do I need to install anything or create an account?+
No. The tool is pure client-side JavaScript: open the page and it works, offline once loaded, with no account, no quota and no data leaving your device.
Related tools
- TBM Advance Rate — Jointed Sandstone
- TBM Advance Rate — Soft Clay (EPB)
- TBM Advance Rate — Sand & Gravel (Slurry)
- TBM Advance Rate — Mixed Face (Rock + Soil)
- TBM Advance Rate — Blocky Basalt
- TBM Advance Rate — Fault Zone Crossing
- TBM Advance Rate — Urban Shallow Soft Ground
- Cooling Time — ABS
- Countersink Depth Calculator
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live