TBM Telemetry — TBM Power Demand
TBM Power Demand for tunnel project performance management.
A mid-size TBM draws a small town's electricity through a cable reel — the utility connection's lead time (often 12–18 months) has launched more schedule crises than any geology. The kVA figure here belongs in the FIRST month's procurement, not the launch quarter's.
Formula
Note: Planning-level tunnelling estimate — actual TBM performance is set by detailed geotechnical baseline data, machine design and the contractor's means & methods. Use for feasibility framing only.
TBM Power Demand for tunnel project performance management. A free tbm performance & tunnelling tool — no sign-up, no upload, instant results in your browser.
About TBM Telemetry — TBM Power Demand
TBM Telemetry — TBM Power Demand computes the governing relationship kVA = (Σ kW × simultaneity) ÷ PF live as you type. A mid-size TBM draws a small town's electricity through a cable reel — the utility connection's lead time (often 12–18 months) has launched more schedule crises than any geology. The kVA figure here belongs in the FIRST month's procurement, not the launch quarter's. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use TBM Telemetry — TBM Power Demand
- 1Enter your values — Cutterhead drive, Hydraulics, conveyors, grout, fans, Simultaneity factor, Power factor (sensible defaults are pre-filled).
- 2Read the live results: Demand, Supply rating.
- 3Check the "with your numbers" line to see kVA = (Σ kW × simultaneity) ÷ PF substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use TBM Telemetry — TBM Power Demand?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula kVA = (Σ kW × simultaneity) ÷ PF with authoritative sources cited on the page (Maidl et al., Mechanised Shield Tunnelling, 2nd ed.; ITA/BTS — Mechanised tunnelling guidelines; NTNU prediction model — hard-rock TBM performance)
- ✓A mid-size TBM draws a small town's electricity through a cable reel — the utility connection's lead time (often 12–18 months) has launched more schedule crises than any geology.
- ✓Niche-specific defaults give a meaningful worked answer the moment the page loads
Frequently asked questions
What formula does the tbm telemetry — tbm power demand use?+
It evaluates kVA = (Σ kW × simultaneity) ÷ PF, exactly as published. Sources: Maidl et al., Mechanised Shield Tunnelling, 2nd ed.; ITA/BTS — Mechanised tunnelling guidelines; NTNU prediction model — hard-rock TBM performance. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
A mid-size TBM draws a small town's electricity through a cable reel — the utility connection's lead time (often 12–18 months) has launched more schedule crises than any geology. Planning-level tunnelling estimate — actual TBM performance is set by detailed geotechnical baseline data, machine design and the contractor's means & methods. Use for feasibility framing only.
When is this calculator the right tool for the job?+
TBM Power Demand for tunnel project performance management. A free tbm performance & tunnelling tool. The kVA figure here belongs in the FIRST month's procurement, not the launch quarter's. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Do I need to install anything or create an account?+
No. The tool is pure client-side JavaScript: open the page and it works, offline once loaded, with no account, no quota and no data leaving your device.
Related tools
- TBM Telemetry — Tunnel Carbon per Metre
- TBM Telemetry — Geotechnical Contingency Sizing
- TBM Advance Rate — Hard Granite (UCS 200 MPa)
- TBM Advance Rate — Abrasive Gneiss
- TBM Advance Rate — Limestone (UCS 80 MPa)
- TBM Advance Rate — Jointed Sandstone
- TBM Advance Rate — Soft Clay (EPB)
- Runner & Regrind Economics — PET (Preform Grade)
- O-Ring Groove Calculator (Gland Design)
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live