Capacity Check — Self-Erecting Tower Crane
Gross-load vs chart utilization for a self-erecting tower crane, with rigging weight and dynamic allowance included.
Self-erectors put tower-crane logistics in a trailer — and modest charts on a ballasted cross. House-builders run them at high utilization because every pick (trusses, pallets, mixers) is known in advance; the moment they meet an unplanned heavy pick is the moment this check earns its keep.
Formula
Note: Rigging and crane decisions are life-safety critical. This calculator is a planning aid — the load chart, sling tags, site lift plan and a qualified lift director govern every real lift.
Gross-load vs chart utilization for a self-erecting tower crane, with rigging weight and dynamic allowance included. A free crane load, wind & rigging safety tool — no sign-up, no upload, instant results in your browser.
About Capacity Check — Self-Erecting Tower Crane
Capacity Check — Self-Erecting Tower Crane computes the governing relationship gross = (net + rigging) × (1 + dynamic%) vs chart at radius live as you type. Self-erectors put tower-crane logistics in a trailer — and modest charts on a ballasted cross. House-builders run them at high utilization because every pick (trusses, pallets, mixers) is known in advance; the moment they meet an unplanned heavy pick is the moment this check earns its keep. Defaults are pre-filled with realistic values for this exact scenario, and the worked example substitutes your numbers step by step so the math is never a black box.
How to use Capacity Check — Self-Erecting Tower Crane
- 1Enter your values — Net load, Rigging + block weight, Chart capacity at this radius/config, Dynamic allowance (sensible defaults are pre-filled).
- 2Read the live results: Gross design load, Chart utilization, Remaining margin.
- 3Check the "with your numbers" line to see gross = (net + rigging) × (1 + dynamic%) vs chart at radius substituted step by step.
- 4Adjust inputs until the scenario matches yours, then copy or share the result.
Why use Capacity Check — Self-Erecting Tower Crane?
- ✓Instant, free and private — every calculation runs client-side in your browser; nothing is uploaded
- ✓Built on the stated formula gross = (net + rigging) × (1 + dynamic%) vs chart at radius with authoritative sources cited on the page (ASME B30.5/B30.9/B30.20 — Cranes, slings and below-the-hook devices; OSHA 29 CFR 1926 Subpart CC — Cranes & derricks in construction)
- ✓Self-erectors put tower-crane logistics in a trailer — and modest charts on a ballasted cross.
- ✓SI ⇄ Imperial toggle converts your inputs in place, so you can work in the units your drawings use
Frequently asked questions
What formula does the capacity check — self-erecting tower crane use?+
It evaluates gross = (net + rigging) × (1 + dynamic%) vs chart at radius, exactly as published. Sources: ASME B30.5/B30.9/B30.20 — Cranes, slings and below-the-hook devices; OSHA 29 CFR 1926 Subpart CC — Cranes & derricks in construction. The substituted worked example on the page lets you verify every step against the textbook.
How should I read the result — and how far can I trust it?+
Self-erectors put tower-crane logistics in a trailer — and modest charts on a ballasted cross. Rigging and crane decisions are life-safety critical. This calculator is a planning aid — the load chart, sling tags, site lift plan and a qualified lift director govern every real lift.
When is this calculator the right tool for the job?+
Gross-load vs chart utilization for a self-erecting tower crane, with rigging weight and dynamic allowance included. A free crane load, wind & rigging safety tool. House-builders run them at high utilization because every pick (trusses, pallets, mixers) is known in advance; the moment they meet an unplanned heavy pick is the moment this check earns its keep. For neighbouring scenarios, the related tools below cover the same engine with different presets.
Does it support both metric and imperial units?+
Yes — the SI ⇄ Imperial toggle converts the values already in the fields, preserving the physical quantity, so you can flip mid-calculation without re-entering anything.
Related tools
- Capacity Check — All-Terrain Mobile Crane
- Capacity Check — Crawler Crane
- Capacity Check — Rough-Terrain Crane
- Capacity Check — Overhead Bridge Crane
- Capacity Check — Rubber-Tyred Gantry (RTG)
- Capacity Check — Loader (Knuckle-Boom) Crane
- Wind Force on Load — Formwork Table
- Diesel Airflow — Roof Bolter
- Asphalt Tonnage — Pothole / Patch Program
Related Manufacturing tools
Spindle Speed Calculator — Aluminum 6061
Carbide starting RPM for milling Aluminum 6061: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Mild Steel 1018
Carbide starting RPM for milling Mild Steel 1018: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● LiveSpindle Speed Calculator — Stainless 304
Carbide starting RPM for milling Stainless 304: n = 1000·Vc/(π·D) with a handbook cutting speed preset.
● Live